Get a Free Estimate Fast response • Serving all of Vermont
★★★★★
“The Total Roofing team & Mike Taylor exceeded my expectations on my roof replacement project last week. The team replaced two roof surfaces — one slate & one asphalt — on my 200 year old home with care & expertise.”
★★★★★
“What an amazing, high quality company. Did my roof in a day! Very experienced crew and was communicative during the whole process.”
top of page

Asphalt Shingle Installation Guide: Installing Durable Asphalt Shingle Roofs

Writer: Alex Morgan
Alex Morgan
4 days ago
3 min read

Installing a durable roof is essential for protecting your property from the elements. Asphalt shingles remain one of the most popular roofing materials due to their affordability, ease of installation, and long-lasting performance. In this guide, I will walk you through the key steps and considerations for installing a durable asphalt shingle roof. Whether you are replacing an old roof or installing a new one, this information will help you make informed decisions and achieve a quality result.


Asphalt Shingle Installation Guide: Step-by-Step Process


The installation process for asphalt shingles requires careful preparation and attention to detail. Here is a straightforward guide to help you install your roof correctly:


  1. Inspect and Prepare the Roof Deck

    Start by inspecting the roof deck for any damage or rot. Replace any compromised sections to ensure a solid foundation. The deck should be clean, dry, and smooth before you begin.


  2. Install Underlayment

    Lay down a waterproof underlayment over the entire roof deck. This layer acts as a secondary barrier against moisture. Use roofing felt or synthetic underlayment, securing it with roofing nails or staples.


  3. Install Drip Edge

    Attach metal drip edges along the eaves and rakes of the roof. This prevents water from seeping under the shingles and protects the edges of the roof deck.


  4. Apply Starter Strip Shingles

    Place starter strip shingles along the eaves. These provide a secure base for the first row of shingles and help prevent wind uplift.


  5. Lay Asphalt Shingles

    Begin installing shingles from the bottom edge of the roof, working upward. Follow the manufacturer’s instructions for overlapping and nailing patterns. Use galvanized roofing nails and ensure each shingle is securely fastened.


  6. Install Flashing

    Apply metal flashing around roof penetrations such as chimneys, vents, and skylights. Proper flashing prevents leaks in vulnerable areas.


  7. Finish with Ridge Cap Shingles

    Install ridge cap shingles along the roof’s peak. These shingles cover the ridge and provide a finished look while protecting the roof’s highest point.


Eye-level view of asphalt shingles being installed on a roof
Eye-level view of asphalt shingles being installed on a roof

Are Asphalt Shingles a Good Choice for Roofing?


Asphalt shingles offer several advantages that make them a practical choice for many roofing projects:


  • Cost-Effective: Asphalt shingles are generally less expensive than other roofing materials like metal or tile.

  • Ease of Installation: Their lightweight nature and standard size make installation faster and simpler.

  • Variety of Styles and Colors: You can choose from many designs to match your building’s aesthetic.

  • Durability: Quality asphalt shingles can last 20 to 30 years with proper maintenance.

  • Weather Resistance: They perform well in various climates, including the cold winters and wet conditions common in Southern Vermont.


However, asphalt shingles may not be the best option for every situation. They can be susceptible to damage from high winds or hail if not installed correctly. Proper installation and maintenance are key to maximizing their lifespan.


Tools and Materials Needed for Asphalt Shingle Installation


Before starting your project, gather the necessary tools and materials. Having everything ready will make the process smoother and safer.


Tools:

  • Roofing hammer or nail gun

  • Utility knife

  • Chalk line

  • Tape measure

  • Ladder

  • Safety harness and gloves

  • Pry bar (for removing old shingles)


Materials:

  • Asphalt shingles

  • Roofing nails (galvanized)

  • Underlayment (felt or synthetic)

  • Drip edge metal

  • Flashing

  • Starter strip shingles

  • Ridge cap shingles


Make sure to purchase enough shingles and materials to cover your roof area plus an extra 10-15% for waste and cuts.


Tips for Ensuring a Long-Lasting Asphalt Shingle Roof


To get the most out of your asphalt shingle roof, follow these practical tips:


  • Follow Manufacturer Guidelines: Always adhere to the installation instructions provided by the shingle manufacturer.

  • Use Proper Nailing Techniques: Nails should be placed just below the sealant strip and driven flush with the shingle surface without over-penetrating.

  • Maintain Roof Ventilation: Proper attic ventilation prevents heat buildup and moisture accumulation, which can damage shingles.

  • Inspect and Repair Regularly: Check your roof annually for damaged or missing shingles and fix issues promptly.

  • Clean Gutters and Downspouts: Keeping gutters clear prevents water backup that can damage shingles and the roof deck.


High angle view of roofing tools and materials laid out on a roof deck
Tools and materials ready for asphalt shingle installation

Final Thoughts on Installing Durable Asphalt Shingle Roofs


Installing a durable asphalt shingle roof requires careful planning, quality materials, and precise execution. By following the steps outlined in this guide, you can ensure your roof provides reliable protection for years to come. Remember to inspect your roof regularly and address any problems early to extend its lifespan.


If you want to learn more about asphalt shingles or need professional assistance, consider consulting experts who specialize in roofing solutions tailored to Southern Vermont’s climate. A well-installed asphalt shingle roof can safeguard your property and enhance its value effectively.

 
 
 

Comments


bottom of page